Frequency Range (-10 dB) | 35 Hz - 20 kHz |
Frequency Response (±3 dB) | 41 Hz – 18 kHz |
Coverage Pattern | /64: 60° x 40°/66: 60° x 60°/95: 90° x 50° /26: 120° x 60° |
Directivity Factor (Q) | 14.5 |
Directivity Index (DI): | 11.6 dB |
Crossover Modes | Bi-amp/Passive switchable |
Passive Crossover Frequency | 2 kHz |
Transducer Power Rating (AES) | LF: 500 W (2000 W peak), 2 hrs350 W (1400 W peak), 100 hrsHF: 40 W (160 W peak), 2 hrs |
Long-Term System Power Rating (IEC) | Passive mode: 350 W (1400 W peak), 100 hrs |
Maximum SPL | Bi-amp mode:LF: 125 dB-SPL cont avgHF: 131 dB-SPL cont avg. |
System Sensitivity (1w @ 1m) | Passive mode: 98 dB SPL |
Low Frequency Driver | 1 x JBL 265H-1 380 mm (15 in) driver with 50.8 mm (2 in) dual voice coil |
Nominal Impedance | 8 ohms |
Sensitivity (1W @ 1m, within operational band) | 99 dB SPL |
High Frequency Driver | JBL 2408H-1, 38 mm (1.5 in) exit compression driver, 38 mm (1.5 in) voice coil |
Sensitivity (1W @ 1m) | 115 dB SPL |
Waveguide | PT-H66HF-1 |
Enclosure | Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade 11-ply birch plywood |
Suspension Attachment | 15 points (4 top, 4 bottom, 2 each side, 3 rear), M10 threaded hardware |
Finish | Black DuraFlex™ finish. White available upon request. |
Grille | Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing. |
Input Connector | NL4 Neutrik Speakon® and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through. |
Environmental Specifications | Mil-Std 810; IP-x3 per IEC529. |
Dimensions (H x W x D invertical cabinet orientation) | 783 x 422 x 504 mm(30.8 x 16.6 x 19.85 in) |
Net Weight | 25.0 kg (55 lb) |
Optional Accessories | M10 x 35 mm forged shoulder eyebolts with washers U-Bracket MTU-1 |