CDi 4|600BL
Crown

Analog + BLU link input, 4 channel, 600W per output channel

CDi 4|600BL는 오디오 믹서로부터 전달된 음향 신호를 스피커에서 출력이 될 수 있도록 소리를 증폭하는 기기로서 다양한 기능이 내장된 고성능 파워앰프입니다. 본 기기는 DriveCore 시리즈로 다양한 어플리케이션으로 사용이 가능합니다. 네트워크 제어/모니터링, DSP의 내장으로 다양한 음향 환경에 적합하도록 설계되었습니다. 또한 BLU 링크를 통하여 256채널의 디지털 오디오 신호를 전송할 수 있습니다.

• 크로스오버, EQ 필터, 딜레이, 출력 리미터 등 내장형 DSP

• 2,4, 8,16옴 임피던스 출력과 70V/140V하이임피던스 출력 사용 가능

• 직관적인 전면부 LCD스크린으로 빠르고 쉬운 설정

• 1000ms의 Input delay


 > Feature Comparison



 

 

 > Output Power: Dual Mode - All Channels Driven


Minimum Guaranteed Power (1kHz, all channels driven, max distortion 0.5%, duration 0.5 seconds, 120 - 240Vrms - 50/60Hz)


> Output Power: Bridge Mono Mode - All Channels Driven


Minimum Guaranteed Power (1kHz, all channels driven, max distortion 0.5%, duration 0.5 seconds, 120 - 240Vrms - 50/60Hz)  

Specifications

BLU link Yes
Channels 4
Sensitivity (for full rated power at 8 ohms) 0.7V RMS
Rated Power Output (per channel @ 4 ohms) 600W
Analog Input Signal to Noise Ratio (ref. rated power, 100V, 20Hz - 20kHz) at 8 ohms) > 104dB
THD (full rated power, 20 Hz - 20 kHz) 0.35%
Damping Factor (20 Hz to 100 Hz) > 1000
Frequency Response (8Ω, 20 Hz - 20 kHz) +/-0.25dB
Crosstalk (below rated power) 20 Hz to 1 kHz > 80dB
Input Impedance (nominally balanced, nominally unbalanced) 20 kΩ balanced, 10 kΩ unblanced
Dimensions (inches) (W x H x D) (depth not including 1.3 inch front panel protrusion) 19 x 3.5 x 12.25
Weight 16.3 lbs (7.39 kg)
Power Supply Connector "15A IEC connector, 100 – 240V "

<개인정보처리방침>