SPECIFICATIONS
COMPATIBLE ENOVA DGX SYSTEMS
COMPATIBLE ENOVA DGX I/O BOARDS
- DGX-I-HDMI, Enova DGX
HDMI Input Board (FG1058-540)
- DGX-O-HDMI, Enova DGX
HDMI Output Board (FG1058-550)
- DGX-I-DVI, Enova DGX DVI
Input Board (FG1058-600)
- DGX-O-DVI, Enova DGX DVI
Output Board (FG1058-610)
- DGX-I-DXL, Enova DGX
DXLink Twisted Pair Input Board (FG1058-570)
- DGX-O-DXL, Enova DGX
DXLink Twisted Pair Output Board (FG1058-580)
- DGX-I-DXF-MMD, Enova
DGX DXLink Multimode Fiber Input Board, Duplex (FG1058-622)
- DGX-O-DXF-MMD, Enova
DGX DXLink Multimode Fiber Output Board, Duplex (FG1058-632)
- DGX-I-DXF-MMS, Enova
DGX DXLink Multimode Fiber Input Board, Simplex (FG1058-623)
- DGX-O-DXF-MMS, Enova
DGX DXLink Multimode Fiber Output Board, Simplex (FG1058-633)
- DGX-I-DXF-SMD, Enova
DGX DXLink Single Mode Fiber Input Board, Duplex (FG1058-620)
- DGX-O-DXF-SMD, Enova
DGX DXLink Single Mode Fiber Output Board, Duplex (FG1058-630)
- DGX-I-DXF-SMS, Enova
DGX DXLink Single Mode Fiber Input Board, Simplex (FG1058-621)
- DGX-O-DXF-SMS, Enova
DGX DXLink Single Mode Fiber Output Board, Simplex (FG1058-631)
AUDIO SWITCHING
- 40x40 Matrix Audio Switching. Each of the embedded or auxiliary analog audio
outputs has independent volume, EQ and sync delay
AUDIO INPUTS
- Auxiliary Analog Audio Input Connections: (4) 3.5 mm 10-position
captive-wire terminals; support balanced (differential) or unbalanced
(single-ended) stereo audio
- 32 Embedded digital audio inputs from video input positions (Embedded audio
must originate as 2 channel PCM) - Applies to embedded audio inputs on Enova DGX
Input Boards for positions 1-32
- 8 Auxiliary audio inputs on the Input Board of the Audio Switching Board Kit
- Audio inputs 33-40
AUDIO OUTPUTS
- Auxiliary Analog Audio Output Connections: (4) 3.5 mm 10-position
captive-wire terminals; support balanced (differential) or unbalanced
(single-ended) stereo audio
- 32 Embedded digital audio to video outputs - Applies to embedded audio
outputs on Enova DGX Output Boards for positions 1-32
- 8 Auxiliary audio outputs on the Output Board of the Audio Switching Board
Kit – Audio outputs 33-40
AUDIO ADJUSTMENTS PER INPUT (EMBEDDED VIDEO AND AUXILIARY
INPUTS)
- Audio Input Compression:
- Independent Compression per input
- Attack: 1 to 2000 ms
- Release: 10 to 5000 ms
- Compression Ratio: 1 to 20
- Threshold: -60 to 0 dB
- Audio Input Gain Compensation: -24 dB to +24 dB, 1 dB steps
AUDIO ADJUSTMENTS PER OUTPUT (EMBEDDED VIDEO AND AUXILIARY
OUTPUTS)
- Audio Output Compression:
- 10-band parametric EQ with variable center frequency, filter type and Q per
band
- Center Frequency: 20 Hz to 20 kHz
- EQ Gain: -12 to +12 dB
- Q: 0.1 to 20
- Filter Types: Bell, Base Shelving, Treble Shelving, Low Pass, High Pass,
Band Pass, Band Stop
- Audio Output Sync Delay: 0 to 200 ms
- Balance Control: 20 steps each left and right
- Independent EQ, Volume and Balance control per output
- Test Tone Generator: Single selection of test tone type available on all
outputs simultaneously. Individually enabled/disabled per output – 60 Hz, 250
Hz, 400 Hz, 1 kHz, 3,Hz, 5 kHz, 10 kHz, Pink Noise, White Noise
AUXILIARY ANALOG AUDIO INPUTS
- Input Level (Nominal): +4 dBu (1.228 Vrms) balanced or -10 dBV (0.3162 Vrms)
unbalanced
- Input Level (Maximum): +14 dBu
- Input Impedance: >17 kOhms balanced, >10 kOhms unbalanced
- Audio Channel Crosstalk: Balanced Line Inputs: -98 dB @ 0 dBV, 20 Hz to 20
kHz, Unbalanced Line Inputs: -70 dB @0 dBV, 20 Hz to 20 kHz
AUXILIARY ANALOG AUDIO OUTPUTS
- Output Level (Maximum): +17 dBu (line level)
- Output Impedance: 200 Ohms (line level)
- Audio Frequency Response: Line: 20 Hz to 20 KHz +/-0.1 dB
- Audio S/N Ratio: Line: 105 dB @ 10 dBV, AES17
- Audio THD+N: Line: 0.003% @ 0 dBV, 1 kHz
DOWN-MIX
- Down-mix input fed from selectable embedded audio input from any Enova DGX
Input Board. Down-mixed audio switchable to all embedded/auxiliary audio
outputs.
- Down-mix input format support: Dolby TrueHD, Dolby Digital, DTS-HD Master
Audio, DTS, 2 CH through 8 CH L-PCM