Compatible Formats: HDMI Video, Audio, Ethernet, USB (HID), Power, Serial
Control and IR Control
Signal Type Support: DXLink Twisted Pair
Connectors: (4) RJ-45 Ports
Progressive Resolution Support:
480p up to 4096 x 2160p, 60 Hz* (*Y/Cb/Cr 4:2:0, with 4K RX Scaler in Bypass
mode)
NOTE: See full list of supported formats in “DXLink Twisted Pair 4K
Transmitters and Receivers Hardware Reference Manual”.
Interlaced Resolution Support:
480i, 576i, 1080i
If input is interlaced, all scaled outputs will deinterlace video to a
progressive resolution format. If in scaler Bypass mode, interlaced input will
pass through unaltered.
4K Resolution Support:
3840 x 2160p @ 24/25/30 Hz
4096 x 2160p @ 24/25/30 Hz
3840 x 2160p @ 60 Hz, 4:2:0*
4096 x 2160p @ 60 Hz, 4:2:0*
Supported by DX-RX-4K when in Bypass Scaling mode
NOTE: See full list of supported formats in “DXLink Twisted Pair 4K
Transmitters and Receivers Hardware Reference Manual”.
Audio Format Support: Dolby TrueHD, Dolby Digital, DTS-HD Master Audio, DTS,
2 CH through 8 CH L-PCM (Dolby Digital and DTS support up to 48 kHz, 5.1
channels)
Compatible AMX Products:
Must be used in conjunction with an Enova DGX 800, 1600, 3200 or 6400
Digital Media Enclosure and a DXLink Twisted Pair Transmitter.
Compatible with all AMX 4K DXLink Twisted Pair Transmitters including 4K
HDMI Decor Style Wallplate, 4K Solecis Digital Switchers (including 4x1, 5x1 and
8x1). Also compatible with (non 4K) DXLink Twisted Pair Transmitters including
HDMI Transmitter Module, Multi-Format Decor Style Wallplate, and Multi-Format
Wallplate, and Solecis Digital Switchers (including 4x1, 5x1 and 8x1).
For passage of 4K signal content, DXLink Twisted Pair 4K Boards must be used
in conjunction with DXLink Twisted Pair 4K Transmitters and Receivers.
Additional compatibility is available between DXLink Twisted Pair 4K
equipment and DXLink Twisted Pair (non-4K) equipment (see the “DXLink
Compatibility” Appendix in the “DXLink Twisted Pair 4K Transmitters and
Receivers Hardware Reference Manual” at www.amx.com).