DisplayPort ++ (Input Only, With HDMI Cable Adapter)
Connectors: 4 HDMI Type A Female Ports
Video Data Rate (Max): 8.91 Gbps (max)
Video Pixel Clock (Max): 297 MHz
Progressive Resolution Support: 480p up to 4096x2160p,60 Hz (Y/Cb/Cr 4:2:0
& 4K RX Scaler in Bypass)
Interlaced Resolution Support: 480i, 576i, 1080i (NOTE: If input is
interlaced, all scaled outputs will deinterlace video to a progressive
resolution format. If in scaler Bypass mode interlaced input will pass through
unaltered.)
4K Resolution Support: 3840x2160p@24/25/30 Hz, 4096x2160p@24/25/30 Hz,
3840x2160p@60 Hz, 4:2:0*, 4096x2160p@60 Hz, 4:2:0 (NOTE: Supported by DX-RX-4K
when in Bypass Scaling mode.)
HDMI Cable Requirement: HDMI High Speed Cable, Category 2, Required
Input Equalization: Yes, adaptive to 21 ft. (7 m) (Cable distance support
dependent on cable quality and signal format.)
Input Re-clocking (CDR): Yes
Deep Color Support:
24-bit, 30-bit, 36-bit
30-bit and 36-bit are only supported when the HDMI Output Board or DXLink RX
Scaler is in Bypass mode and format is 1080p60 or less.
Color Space Support:
RGB 4:4:4
YCbCr 4:4:4, 4:2:2, and 4:2:0
Input signal support for YCbCr 4:4:4 and 4:2:2, output color-space is
converted to RGB 4:4:4
4:2:0 only supported at 2160p 50/60 Hz with 4K RX Scaler in
Bypass
3D Format Support:
Frame Packing 1080p up to 24 Hz
Frame Packing 720p up to 50/60 Hz
Frame Packing 1080i up to 50/60 Hz
Top-Bottom 1080p up to 24 Hz
Top-Bottom 720p up to 50/60 Hz
Side-by-Side Half 1080i up to 50/60 Hz
NOTE: The Scaler on corresponding output board or RX must be set to
Bypass mode.