Control 25-1L
JBL

Compact 8-Ohm Indoor/Outdoor Background/Foreground Speaker

Control 25-1L은 실내 및 실외에서 모두 사용이 가능한 스피커로서 고강성 폴리스티렌 재질이 도포된 엔클로우저를 사용하고 있으며, 마인팅용 전면 패널을 통해 표준 육각 렌치를 사용하여 쉽게 최적의 상태로 고정할 수 있어 설치가 매우 쉽습니다.

  • • 방습의 인클로저 및 트랜스 듀서
  • • 100 ° x 100 °의 커버리지
  • • 과부하 보호 회로
  •  

    Frequency Response (-10dB)60 Hz to 20 kHz
    Frequency Response (±3 dB)85Hz - 17 kHz
    Power Rating200 W Continuous Program (2 hrs) *Continuous Pink Noise rating is IEC-shaped pink noise with a 6 dB crest factor. Continuous Program Power is defined as 3 dB above the Continuou Pink Noise Rating and is a conservative expression of the system’s ability to handle normal speech and music program material.
    Maximum Input Voltage25.3 V RMS (2 hrs), 50.6 V peak
    Maximum SPL (1m)110 dB ave. Continuous Pink Noise (116 dB peak) *Calculated from sensitivity and power handling, exclusive of power compression.
    Sensitivity90 dB, 1W/1m (ave. 100 Hz – 10 kHz) *Half-space (on-wall) averaged 100 Hz – 10 kHz, 2.83V.
    Coverage Angle100° x 100° *Coverage angle (-6 dB) average between 1 kHz and 12 kHz.
    Directivity Factor (Q)6.04 (averaged 1kHz – 16kHz)
    Directivity Index (DI)7.6dB (averaged 1kHz – 16kHz)
    Impedance8 ohms
    Crossover Type2nd order low-pass, 3rd order high-pass
    Recommended Protective High-Pass60 Hz high-pass (24 dB/oct) *For protection against driving below resonant frequency and to keep transformer out of saturation.
    DriversLF: 135 mm (5.25 in), woven-fiberglass cone with pure butyl rubber surround with Weather-Edge frame protection, high-temp fiberglass voice coil former, high-temp voice coil wire, optimized cone geometry, linear suspension spider, and FEA optimized motor structure.
    HF: 19 mm (0.75 in) PEI diaphragm, low-viscosity ferro-magnetic fluid, and lightweight Kapton™ voice coil former.
    EnclosureHigh Impact Polystyrene (HIPS), painted with highly-UV resistant paint on white (-WH) version for maximum UV fade resistance.
    GrilleHighly zinc-plated, finished in durable TGIC polyester powdercoating. MTC-25WMG-1 (&-WH) available with WeatherMax™ multi-layer foam and tight-weave mesh vapor barrier backing.
    InstallationInvisiBall wall-mounting system included. Two 6 mm attachment points (on top and bottom) for optional MTC-25UB-1 (&-WH) U-bracket. Secondary safety attachment loop point on back panel.
    Outdoor CapabilityIP-44 per IEC529 (IP-55 when installed with the optional MTC-25WMG-1 WeatherMax™ grille and either MTC-PC2 or MTC-PC3 panel cover.) Exceeds MilSpec 810 for humidity, salt-spray, temperature & UV. Passes MilStd-202F for salt spray and ASTM G85 for acid-air plus salt spray. Optional MTC-25WMG-1 WeatherMax™ grille for breaking up driving rain and for especially difficult environments.
    Input ConnectorsScrew-down terminal strip, zinc-plated copper based, nickel-plated metal screws and washers. Accepts up to 9 mm outside 4 mm inside open lugs (#6, #8, or #10 lug), plus bare wire (up to 12 AWG / 2.5 mm2). Optional MTC-PC2 and MTC-PC3 protective panel covers available to provide sealed entrance for additional weather protection.
    Safety AgencyROHS-compliant
    ColorsBlack (RAL9004) or white (-WH, RAL9016)
    Dimensions (H x W x D)243 x 188 x 145 mm (9.6 x 7.4 x 5.7 in); 203 mm (8.0 in) deep total when mounted on InvisiBall wall-mount bracket. *In vertical orientation
    Net Weight (each)3.0 kg (6.7 lbs)
    Shipping Weight7.3 kg (16.0 lbs) for the pair-pack (for 2 speakers)
    Included AccessoriesInvisiBall™ wall-mounting system, 6 mm x 100 mm hex key
    Optional AccessoriesMTC-25UB-1 – Yolk-type U-bracket (&-WH)
    Mounting HardwareInvisiBall™ aimable wall-mounting system included. Optional U-bracket.

     

    <개인정보처리방침>