• 팬텀파워 및 건전지 사용 가능
• 1/4” 잭 및 XLR 입력
• 지속적인 전원
- 팬텀파워가 공급되지 않거나 사고로 꺼지게 될때 자동으로 내부의 9V 건전지를 사용하도록 전환
Input Impedance | 1 MOhm (pad at 0dB), 47 kOhm (pad at -20dB or -40dB) |
Max Input | +9dBu (pad at 0dB), +29dBu (pad at -20dB), +49dBu (pad at -40dB) |
Input Connectors | Two Parallel 1/4" jack connectors (Tip Hot +ve, Sleeve ground), and a parallel XLR connector (unbalanced) (Pin 2 Hot +ve, Pin 1 & 3 ground) |
Output | Transformer Balanced |
Max Output | +8dBu into 600 Ohms or greater |
Output Connectors | XLR3-32 or equivalent |
THD | < 0.005% at 1khz, 0dbu output |
Noise | < -105db unweighted, 22hz-22khz, rms* |
Frequency Response | 30Hz to 20kHz, +0dB/-1dB |
Main/Standby battery | 9 volt PP3 type, preferably alkaline |
Power Consumption | on phantom: less than 7.5mA, on battery: less than 2mA. |
Phantom Power | +20 volts DC to +48 volts DC |
Unit Weight | 650 gms, excluding batteries |
Dimensions | 59 mm x 124 mm x 143 mm (2.3" x 4.9" x 5.6") |