• JBL의 드라이브팩 DPC-2 앰프 모듈이 장착, 1750와트의 피크 출력. DSP를 바탕으로 한 입력 모듈로 시스템 최적화와 이퀄라이저 기능
• 18인치, 고출력 경량 2268FF 듀얼 보이스 코일, 네오디뮴 자석 디퍼렌셜 드라이브 우퍼
• 통합된 리깅 하드웨어로 스피커 및 옵션으로 장착하는 프레임을 심플하게 연결
• 20mm 강화 폴 소켓으로 안전하게 새틀라이트 스피커를 마운팅
• 대형 포트로 왜곡 저하
Power Rating | 1500 Watts PeakLF: Dual-Bridged Technology™, Class D |
Frequency Range | 31 Hz – 220 Hz |
Dimensions (H x W x D) | 508 mm x 597 mm x 749 mm (20.0 in x 23.5 in x 29.5 in) |
Frequency Response (-10dB) | 31 Hz – 220 Hz |
Maximum Peak Output | 126 dB SPL at 1m |
Bandpass Nominal Impedance | LF: 2 x 2 ohms |
LF Driver | 1 x JBL 2268FF 457 mm (18 in) dual voice coil Differential Drive® woofer with neodymium-magnet |
Inputs | XLR with loop through |
User Controls | Input Attenuator (0-16 dB)Selectable 80 Hz or 120 Hz Low Pass 80 Hz High-Pass enable/disable for XLR loop thru. |
System Processing | DSP based, resident in Input Module |
System Management | DSP based limiters for mechanical and thermal protection |
AC Power Operating Range | 90-132 VAC or 216-264 VAC, 50/60Hz |
AC Line Voltage | User selectable: 120V/240V (-15%, +10%) |
AC Input Connector | Neutrik PowerCon (NAC 3MPA) |
AC Loop Through Connector | Neutrik PowerCon (NAC 3MPB) |
AC Current Requirements | 6A per system at 120V, 3A per system at 240V |
Enclosure | 18 mm birch plywood. |
Suspension / Mounting | Optional VRX-AF line-array frame kit or 10 mm forged eyebolts |
Finish | Black DuraFlex™ finish |
Grille | Powder coated, black, 16-gauge perforated steel with acoustically transparent foam |
Net Weight (each) | 38.5 kg (85 lb) |
Optional Accessories | VRX-AF array frameSRX718S-CVR: Pull-over padded cover (works with WK-4S) SS4-BK adjustable satellite speaker pole WK-4S Caster kit |
Outputs | 1 x XLR |
Nominal Impedance | LF: 2 x 2 ohms |