• 8인치 듀얼 콘 드라이버 장착
• 600mm x 600mm (미터법) 그리드 천장에 쉽게 설치 가능
• 다공 금속 그릴 포함
• 70/100V 및 로우 임피던스
• 손쉬운 배선 연결
Drivers | High-efficiency 200 mm (8 inch) dual-cone driver with 25 mm (1 in) diameter voice coil, Kapton coil former, and high-temperature voice coil wire. |
Frequency Range (-10dB) | 100 Hz – 16 kHz |
Sensitivity | 96 dB (2 kHz - 6 kHz) |
Coverage Angle | 100° conical (1 kHz - 4 kHz) |
Maximum SPL (1m) | 108 dB (low-impedance, 116 dB peak) 106 dB (top 70V/100V tap) |
Impedance | 8 ohms (in direct/thru setting) |
Transformer Taps | 10 W, 5 W, 2.5 W (plus 1.3 W @ 70V) |
Recommended Protective High-Pass | 90 Hz high-pass (24 dB/oct) for 8Ω direct or any 70V or 100V tap setting |
Power Capacity (at low-Z) | 40 Watts Continuous Program Power 20 Watts Continuous Pink Noise |
Input Connectors | Bare wire inside protected in touch-proof wiring compartment. |
Tap Selector | Rotary switch accessible from side of backcan |
Materials | Steel rear enclosure, front baffle, and perforated grille |
Grille Color | White |
Safety Agency | Suitable for use in air handling spaces certified per UL1480A, Speakers for Commercial and Professional Use; UL2043, Standard for Fire Test for Heat and Visible Smoke Release for Discrete Products Installed in Air-Handling Spaces; NFPA90 & NFPA70; S7232/UL Listed, Signaling Speaker. |
Dimensions | 595 x 595 x 103 mm (23.4 x 23.4 x 4.1 in) |
Net Weight | 6.9 kg (15.2 lbs) each |
Shipping Weight | 15.5 kg (34.2 lbs) per pair-pack |
Ceiling Cutout Size | No cutout required. Speaker drops into ceiling grid |
Suspension / Safety-Seismic Attachment Points | Two tabs on back baffle, plus 4 holes in corners |
Power Rating | See transformer taps |
Color | White |
Backcan | formed steel (blind-mount) |
Baffle/Rim | Metal |
Plenum Usage | Yes, backcan included |