CBT 100LA-LS
JBL

Line Array Column Loudspeaker with EN54:24 Certification

CBT 100LA-LS는 매우 넓은 수평 커버리지를 자랑하는 컬럼형 라인어레이 스피커로써, BeamWidth 기술이 적용되어 있는 스피커입니다. 본 스피커는 슬림형 디자인이 필요한 공간에 최적화된 스피커이며, 보이스에 대한 명료도를 한층 증대하였습니다.

인테리어와 최적의 조화
Constant Beamwidth 기술 탑재
내장형 트랜스포머 탑재
수직패턴 범위 조절 가능(40/15)
LOW/HIGH 임피던스 선택 가능
2드라이버 16개 구성

ComponentsSixteen 50 mm (2 in) Full-Range
Frequency Range (-10 dB)120 Hz – 20 kHz
Coverage PatternVertical:Narrow Mode: 15° (2 kHz - 16 kHz) (±10°) Broad Mode: 40° (1 kHz - 16 kHz) (±10°)Horizontal: 150° (ave, 1 kHz – 4 kHz, ±20°)
Sensitivity (2.83V@ 1m)Narrow: (speech mode) 96 dB (2 kHz - 14 kHz )             (music mode) 93 dB (300 Hz - 18 kHz) Broad: (speech mode) 93 dB (2 kHz - 14 kHz)             (music mode) 90 dB (300 Hz - 18 kHz)
EN54 Sensitivity (@ 4m)76 dB (per EN54:24 spectrum and measurement conditions at 4 meters, set at broad/music mode.)
Nominal Impedance8 ohms (in Thru mode)15w@70v; 30w@100v Tap = 333Ω 30w@70v; 60w@100v Tap = 167Ω 60w@70v; 120w@100v Tap = 83Ω 120w@70v; N/C@100v Tap = 42Ω
Power Capacity(8 ohm setting)325 W (1300W peak), 2 hrs200 W (800W peak), 100 hrs
Max SPLNarrow: (speech mode) 121 dB cont ave (127 peak)            (music mode) 118 dB cont ave (124 peak) Broad: (speech mode) 118 dB cont ave (124 peak)            (music mode) 115 dB cont ave (121 peak)
EN54 Max SPL (@ 4m)92 dB (per EN54:24 spectrum and measurement conditions, at 4 meters)
70V/100V Transformer Taps120W, 60W, 30W, (15W at 70V only), and 8 thru, via switch
Reference AxisSpecification and measurement referenced on-axis vertically and horizontally to the center point of the speaker baffle.
EnclosureFiberglass reinforced ABS cabinet with UL94-5VB flammability rating, painted aluminum grille
Outdoor CapabilityIP-55 rated, per IEC529, when installed with optional MTC-PC2 panel cover. UV, moisture and 200-hr ASTM G85 acid-air/salt-spray resistant.
ColorsBlack or White (-WH)
Insert Points18 M6 insert points on back panel.
MountingIncluded swivel (pan)/tilt wall bracket provides continuously variable +/-80 degree left-right swivel aiming (at no up/down tilt -- see Bracket Guide for maximum swivel range at various up/down tilt angles), continuously adjustable ±15 degree tilt, as well as 5 degree fixed increment points. Eighteen threaded mounting points located on back panel conform to industry standard rectangular 108 x 51 mm (4.25 x 2.0 in) pattern for OmniMount® 30.0 and other compatible third-party brackets. Threaded mounting points can be utilized for suspension.
Dimensions (H x W x D)1000 x 98.5 x 153 (39.4 in x 3.8 in x 6.0 in)
Net Weight7.2 kg (15.8 lb)
Safety AgencyEN54-24:2008 certified (Certificate No. 0359-CPR-00432), when installed with MTC-PC2 terminal panel cover. Cabinet UL94-5VB flammability rated. In accordance with the requirements of IEC60849/EN60849. Transformer UL registered per UL1876.
Included AccessoriesSwivel (pan) / tilt wall bracket MTC-PC2 terminal panel cover
Optional AccessoriesMTC-CBT-FM1 flush-mount low-profile wall-mount bracket MTC-CBT-SMB1 Stand-Mount Bracket for use with 35 mm speaker stand

<개인정보처리방침>