Control 30
JBL

Three-Way High Output Indoor / Outdoor Monitor Speaker

Control 30은 실내 및 실외에서 모두 사용이 가능한 컴팩트 스피커로서 고강성 폴리스티렌 재질이 도포된 엔클로우저를 사용하고 있으며, 마인팅용 전면 패널을 통해 표준 육각 렌치를 사용하여 쉽게 최적의 상태로 고정할 수 있어 설치가 매우 쉽습니다. 또한 회전 가능한 고주파 혼을 통해 수직, 수평 각도를 바꿀수 있으며, 스피커 입구를 보호하기 위한 밀페된 입구 덮개를 가지고 있습니다.

• 120° x 110°의 커버리지

• 70V 또는 100V 라인용 150W 변압기

• 과부하 보호 회로 장착

• 25 mm (1in) 티타늄 다이어프램 압축 드라이버

• 서스펜션을 위한 10개의 10mm 부착 포인트 포함

• U-브래킷(옵션)

• 밀봉된 입력패널 덮개 및 고정나사 입력단자

 

Frequency Range38 Hz – 17 kHz (-10 dB)
Power Capacity500 W Continuous Program Power; 250 W Continuous Pink Noise
Transformer Taps70 V: 150 W, 75 W, 38 W, 19 W 100 V: 150 W, 75 W, 38 W Thru Position: 4 ohms nominal
Frequency Response40 Hz – 16 kHz ( ± 3 dB)
Maximum SPL (1m)Short-Term: 123 dB; Long-Term: 117 dB
Sensitivity93 dB, 1W @ 1m (3.3 ft)
Coverage Angle120° H x 110° V
Directivity Factor (Q)5.2 dB, averaged 500 Hz to 10 kHz
Directivity Index (DI)7.1 dB, averaged 500 Hz to 10 kHz
Impedance4 ohms
Crossover Network3rd order Low Pass LF, 2nd order High Pass/3rd order Low Pass MF, 3rd order High Pass, HF, plus conjugate shaping circuitry.
DriversLF: 250 mm (10 in) fiberglass/Kevlar® cone with pure butyl rubber surround, 50 mm (2 in) voice coil on fiberglass former, neodymium magnet
MF: 125 mm (5 in) anodized aluminum cone with EPDM rubber (Terpolymer of Ethylene and Propylene) surround, 25 mm (1 in) voice coil on fiberglass former
HF: 25 mm (1 in) compression driver, pure titanium diaphragm with patented JBL diamond surround
EnclosureHigh Impact PolyStyrene (HIPS) with 10% glass fill plus patent pending internal 5 mm foamed polyurethane secondary mold
GrilleThermoset composite coated steel, WeatherMax multi-layer foam
Overload ProtectionSonicGuard full range power limiting to protect network and transducers.
Outdoor CapabilityIEC 529 IP-X5 rating. Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV. Passes Mil-Std-202F for salt spray.
Input ConnectorsScrew-down terminal strip, zinc plated copper base, nickel plated metal screws/washers. Accepts up to 9 mm outside 4 mm inside open
Safety AgencyTransformer is listed per UL1876
ColorsBlack or white (-WH)
Dimensions (H x W x D)593 x 372 x 345 mm (23.3 x 14.6 x 13.5 in.)
Net Weight (each)18.9 kg (42 lb)
Shipping Weight (ea)20.3 kg (45 lb)
Included Accessories1 pc MTC-PC2 input panel cover, InvisiBall mounting base, 6 mm x 305 mm InvisiBall Hex wrench.
Optional AccessoriesMTC-30CM (-WH) to install speaker down from the ceiling. MTC-30UB (-WH) U-Bracket
Mounting HardwareInvisiBall™ aimable wall-mounting system included. Optional U-bracket.

 

<개인정보처리방침>