TechDataPS

PRODUCT

Control 23-1L
JBL

Ultra-Compact 8-Ohm Indoor/Outdoor Background/Foreground Speaker

Control 23-1L은 실내 및 실외에서 모두 사용이 가능한 컴팩트 스피커로서 고강성 폴리스티렌 재질이 도포된 엔클로우저를 사용하고 있으며, U-브래킷을 통해 쉽게 최적의 상태로 고정 및 설치 할수 있습니다.

• U-브래킷 사용가능

• 방습의 인클로저 및 트랜스 듀서

• 100 °x 100 °의 커버리지

• 70 Hz - 20 kHz의 주파수 특성

 

Frequency Response (-10dB)70 Hz to 20 kHz
Frequency Response (±3 dB)95 Hz - 19 kHz
Power Rating100W Continuous Program (2 hrs) *Continuous Pink Noise rating is IEC-shaped pink noise with a 6 dB crest factor. Continuous Program Power is defined as 3 dB above the Continuous Pink Noise Rating and is a conservative expression of the system’s ability to handle normal speech and music program material.
Maximum Input Voltage17.2 V RMS (2 hrs), 34.4 V peak
Maximum SPL (1m)103 dB ave. Continuous Pink Noise (109 dB peak) *Calculated from sensitivity and power handling, exclusive of power compression.
Sensitivity86 dB, 1W/1m (ave. 100 Hz – 10 kHz) *Half-space (on-wall) averaged 100 Hz – 10 kHz, 2.83V.
Coverage Angle100° x 100° *Coverage angle (-6 dB) average between 1.5 kHz and 12 kHz.
Directivity Factor (Q)5.8 (averaged 1kHz – 16kHz)
Directivity Index (DI)7.2 dB (averaged 1kHz – 16kHz)
Impedance8 ohms
Crossover Type2nd order low-pass, 2nd order high-pass
Recommended Protective High-Pass70 Hz high-pass (24 dB/oct) *For protection against driving below resonant frequency and to keep transformer out of saturation.
DriversLF: 76 mm (3.0 in), woven-fiberglass cone with pure butyl rubber surround with Weather-Edge frame protection, high-temp Kapton™ voice coil former, high-temp voice coil wire, optimized cone geometry, linear suspension spider, and FEA optimized motor structure.
HF: 13 mm (0.5 in) PEI diaphragm, low-viscosity ferro-magnetic fluid, and lightweight Kapton™ voice coil former.
EnclosureHigh Impact Polystyrene (HIPS), painted with highly-UV resistant paint on white (-WH) version for maximum UV fade resistance.
GrilleHighly zinc-plated, finished in durable TGIC polyester powdercoating. MTC-23WMG-1 (&-WH) available with WeatherMax™ multi-layer foam and tight-weave mesh vapor barrier backing.
Mounting HardwareInvisiBall™ wall-mounting system included. Two 6 mm attachment points (on top and bottom) for optional MTC-23UB-1 (&-WH) U-bracket. Secondary safety attachment loop point on back panel.
Outdoor CapabilityIP-44 per IEC529 (IP-55 when installed with the optional MTC-23WMG-1 WeatherMax™ grille and either MTC-PC2 or MTC-PC3 panel cover.) Exceeds MilSpec 810 for humidity, salt-spray, temperature & UV. Passes MilStd-202F for salt spray and ASTM G85 for acid-air plus salt spray. Optional MTC-23WMG-1 WeatherMax™ grille for breaking up driving rain and for especially difficult environments.
Input ConnectorsScrew-down terminal strip, zinc-plated copper based, nickel-plated metal screws and washers. Accepts up to 9 mm outside 4 mm inside open lugs (#6, #8, or #10 lug), plus bare wire (up to 12 AWG / 2.5 mm2). Optional MTC-PC2 and MTC-PC3 protective panel covers available to provide sealed entrance for additional weather protection.
Agency RatingROHS-compliant
ColorsBlack (RAL9004) or white (-WH, RAL9016)
Dimensions (H x W x D)200 x 141 x 111 mm (7.9 x 5.6 x 4.4 in); 141 mm (5.6 in) deep total when mounted on InvisiBall wall-mount bracket. *In vertical orientation
Net Weight (each)1.6 kg (3.4 lbs)
Shipping Weight3.5 kg (7.6 lbs) for the pair-pack (for 2 speakers), 11.0 kg (24.3 lbs) for master-pack (for 6 speakers)
Included AccessoriesInvisiBall™ wall-mounting system, 4 mm x 80 mm hex key
Optional AccessoriesMTC-23UB-1 – Yolk-type U-bracket (&-WH) MTC-23WMG-1 – WeatherMax grille with backing (&-WH) MTC-23CM – Ceiling-Mount InvisiBall adapter (&-WH)

 

RECOMMENDED PRODUCTS

<개인정보처리방침>