AWC82
JBL

All-Weather Compact 2-Way Coaxial Loudspeaker with 8" LF

AWC82는 8“의 옥외 설치가 가능한 2-way 라우드 스피커로서 실내와 실외에서 모두 사용이 가능합니다. 방수형 스피커로 어떠한 경우나 공간에도 적용될 수 있는 성능과 다양성을 지닌 스피커이며 고출력, 지속패턴 컨트롤, 확장된 주파수 응답성을 컴팩트한 인클로저로 구성하였으며 70V 또는 100V 트랜스포머를 사용하여 운영이 가능한 스피커입니다.

IP56 기준의 방수, 방진 기능
250W 출력 핸들링과 높은 SPL을 제공하는 고감도 스피커
오버로드 보호 기능 탑재
70V/100V 내장형 트랜스포머 내장

 

Frequency Response (-10dB)80 Hz – 20 kHz
Frequency Response (±3 dB)100 Hz – 20 kHz
Coverage Pattern120° x 120°
Directivity Factor (Q)8.1 (1 k – 16 kHz)
Directivity Index (DI)8.4 dB (1 k – 16 kHz)
System Power Rating250 W 2 hrs. 200 W 100 hrs
Sensitivity (2.83V @ 1m)94 dB (Ave. 100 Hz – 20 kHz)
Maximum SPL (1m)Direct 8Ω: 118 dB (peaks of 124 dB) 200 W Tap: 117 dB
Crossover Network1.8 kHz, 3rd order (18 dB/oct) high-pass plus conjugate to HF, 2nd order low-pass to LF
Nominal Impedance8 ohms
Transformer Taps70V: 200W, 100W, 50W, 25W100V: 200W, 100W, 50W
LF DriverKevlar-reinforced cone with weather treatment, 50 mm (2 in) voice coil.
HF Driver25 mm (1 in) diaphragm and voice coil diameter, high temperature polymer diaphragm, patented design, fluid-cooling.
HF Driver ProtectionMinimum audibility SonicGuard™ HF overload protection
EnclosureABS with Glass enclosure, heavily braced
AttachmentTwo M10 (fine-thread) points for included U-bracket. M6 secondary safety attachment point on back panel.
GrilleCorrosion-resistant zinc-rich extra-thick powder coated steel grille, 3-layer assembly with foam and woven poly mesh backing.
Input ConnectionCE-compliant covered barrier strip terminals. Barrier terminals accept up to 9 mm outside 4 mm inside open-lug (#6, #8 or #10) plus bare wire up to 2.5 mm2 (12 AWG) wire or spade lugs. Terminal compartment cover equipped with gland nut that forms water-tight seal with round-jacketed cables with outside diameters between 4.0 mm (0.16") and 9.0 mm (0.36")
EnvironmentalIP56 per IEC529, with a minimum 5° downward aiming angle. Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV, and ASTM G85 for acid-air/salt-spray (336 hrs).
Dimensions300 x 300 x305 mm (11.8 x 11.8 x 12.0), cabinet 331 mm (13.0 in) including gland nut 359 mm (14.2 in) including bracket extending to back
ColorsAvailable in gray (similar to Pantone 420C) and black (-BK)
Net Weight (each)9.8 kg (21.5 lb), 11.6 kg (25.5 lb) with U-bracket
Shipping Weight14.1 kg (31.0 lb)
Included AccessoriesU-bracket, matches loudspeaker color (gray or black), zinc-rich extrathick powder coated, steel.
Crossover ModesPassive
Nominal LF Driver Impedance8 ohms
Suspension AttachmentTwo M10 (fine-thread) points for included U-bracket. M6 secondary safety attachment point on back panel.

 

<개인정보처리방침>