Frequency Response (-10dB) | 70 Hz – 18 kHz |
Frequency Response (±3 dB) | 100 Hz – 16 kHz |
Coverage Pattern | 110º x 110º |
Directivity Factor (Q) | 7.2 (1 k – 16 kHz) |
Directivity Index (DI) | 7.9 dB (1 k – 16 kHz) |
System Power Rating | 175 W 2 hrs. 120 W 100 hrs (IEC rated) |
Sensitivity (2.83V @ 1m) | 92 dB (Ave. 100 Hz – 18 kHz) |
Maximum SPL (1m) | Direct 8Ω: 114 dB (peaks of 120 dB)120 W Tap: 112 dB |
Crossover Network | 1.8 kHz, 3rd order (18 dB/oct) high-pass plus conjugate to HF, 3rd order low-pass to LF |
Nominal Impedance | 8 ohms |
Transformer Taps | 70V: 120W, 60W, 30W, 15W 100V: 120W, 60W, 30W |
LF Driver | Kevlar-reinforced cone with weather treatment, 38 mm (1.5 in) voice coil. |
HF Driver | 25 mm (1 in) diaphragm and voice coil diameter |
HF Driver Protection | Minimum audibility SonicGuard™ HF overload protection |
Enclosure | ABS with Glass enclosure |
Attachment | Two M10 (fine-thread) points for included U-bracket. M6 secondary safety attachment point on back panel. |
Grille | Corrosion-resistant zinc-rich extra-thick powder coated steel grille, 3-layer assembly with foam and woven poly mesh backing. |
Input Connection | CE-compliant covered barrier strip terminals. Barrier terminals accept up to 8 mm outside 4 mm inside open-lug (#6 or #8) plus bare wire up to 2.5 mm2 (12 AWG) wire or spade lugs. Terminal compartment cover equipped with gland nut that forms water-tight seal with round- jacketed cables with outside diameters between 4.0 mm (0.16”) and 9.0 mm (0.36”). |
Environmental | IP56 per IEC529, with a minimum 5° downward aiming angle. Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV, and ASTM G85 for acid-air/salt-spray (336 hrs). |
Dimensions | 259 x 259 x 255 mm (10.2 x 10.2 x 10.1 in), cabinet 288 mm (11.4 in) including gland nut 309 mm (12.2 in) including bracket extending to back |
Colors | Available in gray (similar to Pantone 420C) and black (-BK) |
Net Weight (each) | 6.8 kg (15.0 lb), 7.7 kg (17.0 lb) with U-bracket |
Shipping Weight | 8.8 kg (19.5 lb) |
Included Accessories | U-bracket, matches loudspeaker color (gray or black), zinc-rich extra thick powder coated, steel. |
Crossover Modes | Passive |
System Sensitivity (1w @ 1m) | 92 dB (Ave. 100 Hz – 18 kHz |
Suspension Attachment | Two M10 (fine-thread) points for included U-bracket. M6 secondary safety attachment point on back panel. |