Frequency Range (-10 dB) | 38 Hz – 20 kHz |
Frequency Response (±3 dB) | 45 Hz – 18 kHz |
Coverage Pattern | /64: 60° x 40°, rotatable waveguide/95: 90° x 50°, rotatable waveguide |
Directivity Index (DI) | 13 dB |
Crossover Modes | Tri-amp/Bi-amp switchable |
Crossover Frequencies | 300 Hz and 2.3 kHz |
Transducer Power Rating (AES) | LF: 1000 W (4000 W peak), 2 hrs750 W (3000 W peak), 100 hrsMF: 350 W (1400 W peak), 2 hrsHF: 100 W (400 W peak), 2 hrs |
Long-Term System Power Rating (IEC) | LF: 600 W (2400 W peak), 100 hrsMF/HF: 200 W (800 W peak), 100 hrs |
Maximum SPL | LF: 127 dB-SPL cont avg (133 dB peak)Tri-amp mode:MF: 133 dB-SPL cont avg (139 dB peak)HF: 135 dB-SPL cont avg (141 dB peak)Bi-amp mode:MF/HF: 133 dB-SPL cont avg (139 dB peak) |
System Sensitivity of Passive Sections (1W @ 1m) | MF/HF Section in Bi-amp mode: 108 dB SPL |
Nominal Impedance System Sensitivity | 8 ohms |
Low Frequency Driver | 1 x JBL 2265H 380 mm (15 in ) Differential Drive® driver with 75 mm (3 in) |
Sensitivity (1W @ 1m) (Low Frequency) | 97 dB SPL |
Midrange Driver | JBL CMCD-82H Cone Midrange Compression Driver with integral 200 mm (8 in) diameter Differential Drive® dual voice coil internal driver |
Sensitivity (1W @ 1m) (Midrange) | 108 dB SPL |
High Frequency Driver | JBL 2432H, 38 mm (1.5 in) exit compression driver, 75 mm (3 in) voice coil |
Sensitivity (1W @ 1m)(High Frequency) | 115 dB SPL |
Enclosure | Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade 11-ply Finnish birch plywood |
Suspension Attachment | 13 points (3 top, 3 bottom, 2 each side, 3 rear), M10 threaded hardware |
Finish | Black DuraFlex™ finish. White available upon request. |
Grille | Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing. |
Input Connector | NL8 Neutrik Speakon® and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop through. |
Environmental Specifications | Mil-Std 810; IP-x3 per IEC529. |
Dimensions (H x W x D in vertical cabinet orientation) | 967 x 561 x 657 mm (38.1 x 22.1 x 25.9 in) |
Net Weight | 45.8 kg (101 lb) |
Optional Accessories | M10 x 35 mm forged shoulder eyebolts with washers. Optional planar array frame kit. See AE Series Bracket Guide. |