Frequency Range (-10 dB)	37 Hz – 20 kHz
Frequency Response (±3 dB)	43 Hz – 18 kHz
Coverage Pattern	/64: 60° x 40°/66: 60° x 60°/95: 90° x 50°/00: 100° x 100°/26: 120° x 60°
Crossover Modes	Bi-amp/Passive switchable
Passive Crossover Frequency	1.5 kHz
Transducer Power Rating (AES)	LF: 400 W (1600 W peak), 2 hrs300 W (1200 W peak), 100 hrsHF: 40 W (160 W peak), 2 hrs
Long-Term System Power Rating (IEC)	Passive mode: 300 W (1200 W peak), 100 hrs
Maximum SPL	Bi-amp mode:LF: 122 dBHF: 131 dB
System Sensitivity (1w @ 1m)	Passive mode: 96 dB SPL
Low Frequency Driver	1 x JBL 262H-1 300 mm (12 in) driver with 50.8 mm (2 in) dual voice coil
Nominal Impedance	8 ohms
Sensitivity (1W @ 1m, within operational band)	97 dB SPL
High Frequency Driver	JBL 2408H-1, 38 mm (1.5 in) exit compression driver, 38 mm (1.5 in) voice coil
Sensitivity (1W @ 1m)	113 dB SPL
Waveguide	PT-H126HF-1
Enclosure	Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade 11-ply birch plywood
Suspension Attachment	15 points (4 top, 4 bottom, 2 each side, 3 rear), M10 threaded hardware
Finish	Black DuraFlex™ finish. White available upon request.
Grille	Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing.
Input Connector	NL4 Neutrik Speakon® and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through.
Environmental Specifications	Mil-Std 810; IP-x3 per IEC529
Dimensions (H x W x D invertical cabinet orientation)	713 x 371 x 458 mm(28.06 x 14.6 x 18.1 in)
Net Weight	20.2 kg (45 lb)
Optional Accessories	M10 x 35 mm forged shoulder eyebolts with washers U-Bracket MTU-3