Frequency Response (-10dB) | 36.5 Hz to 19.5 kHz |
Frequency Response (±3 dB) | 41.5 Hz - 18.5 kHz |
Coverage Pattern | 60° x 40° |
Directivity Index (DI) | 16 dB |
System Sensitivity (1w @ 1m) | LF: 103 dB SPL; Passive Mid-High: 111 dB SPL |
Maximum SPL (1m) | LF - 141 dB Peak; MHF - 143 dB Peak |
Transducer Power Rating (AES) | LF - 1000 W (4000 W Peak); MHF - 400 W (1600 W Peak) |
Crossover | Bi-Amp with passive mid/high crossover (Tri-Amp optional) |
Crossover Frequencies | 220 Hz, 1.2 kHz |
DSP | Custom DSP for Crown ITHD and IT4x3500HD amplifiers |
LF Driver | 2 x JBL 2265H 380 mm (15 in) Diferential Drive driver with 75 mm (3 in) dual voice coil |
MF Driver | 2 x JBL CMCD-82H midrange driver with 200 mm (8 in) diameterDifferential Drive® dual 75 mm (3 in) voice coil |
HF Driver | 2 x JBL 2432H, 38 mm (1.5 in) exit compression driver, 75 mm (3 in) voice coil |
Nominal Impedance | LF: 4 ohms MF: 4 ohms HF: 16 ohms |
Enclosure | Trapezoidal with Rectangular sides, combination of 18 mm and 16 mm (5/8 in) exterior grade birch plywood |
Enclosure WRC/WRX Version | For direct exposure or extreme environments, berglassed with stainless steel hardware |
Grille | Black powder coated zinc treated 14 gauge perforated steel with black foam backing |
Grille WRC/WRX Version | Three layer grille assy consisting of 16-gauge powder coated S.S., backed with O.C. foam and S.S. mesh |
Input Connector | NL4 for bi-amp operation or NL8 for tri-amp operation (optional) |
Input Connectors WRC/WRX Version | 4 conductor 16 awg direct burial cable assy 20 length (or length TBD) |
Environmental | Available WRC/WRX Version: IP55 |
Suspension Attachment | 52 total points (12 top and bottom, 11 each side, 6 back), M10 threaded hardwar |
Dimensions (H x W x D) | 991 mm x 991 mm x 889 mm (39.0 x 39.0 x 35 in) |
Net Weight (each) | 295 lbs (134 kg) |
Crossover Modes | Passive |
System Power Rating | LF - 1000 W (4000 W Peak); MHF - 400 W (1600 W Peak) (AES rated) |
Nominal LF Driver Impedance | 4 ohms |
Nominal MF Driver Impedance | 4 ohms |
Nominal HF Driver Impedance | 4 Ohms Passive Mid/High Crossover |