Two-Way Full Range Loudspeaker
with 2 x 10" Differential Drive® LF
VLA-C2100는 듀얼 10“ 2-WAY 풀 레인지 라인어레이 스피커로서, 모듈 식 디자인 컨셉을 채용하여 큰 규모 공연장, 경기장, 돔 형식의 스테디움 등 분산 클러스터로 사용하기 위한 소형 라인어레이 스피커로 설계 되었습니다. 높은 명료도와 음압을 제공하여 소음을 극복할 수 있는 디자인으로 고정 설치에 최적화 되었습니다. 안전한 리깅방식이 적용되었으며, IP-55 등급의 방진/방습 규격에 준합니다.
•저중량 및 고출력을 위한 트랜스듀서 탑재
•고역대의 혼 로드 모듈로 최대의 민감도와 패턴 컨트롤 제공
•IP-55 등급 방진/방습 규격 적용
•유리섬유 재질의 인클로저와 내후성이 강한 부품 구성
Frequency Response (-10dB) | 86 Hz - 18 kHz |
Frequency Response (±3 dB) | 109 Hz – 15.3 kHz |
Full Range | 800 W Continuous Pink Noise (3200 W peak), 2 hrs 400 W Continuous Pink Noise (1600W peak), 100 hrs |
Bi-amp LF | 800 W Continuous Pink Noise (3200 W peak), 2 hrs 400 W Continuous Pink Noise (1600W peak), 100 hrs |
Bi-amp HF | 150 W Continuous Pink Noise (600 W peak), 2 hrs 50 W Continuous Pink Noise (200 W peak), 100 hrs |
Full-Range | 80 V Rms (2 hrs), 160 V peak |
Maximum SPL (1m) | 131 dB Cont. Ave (2 hrs), 137 dB Peak |
Coverage Pattern (-6 dB) | Horizontal: 100° (+5°/-15°, 1.5 kHz to 15 kHz) Vertical: Varies with array size and configuration |
Amplifiers | Crown DCi Family with DSP on-boardRecommended: Crown DCi 2 | 1250N Crown DCi 4 | 1250N/ND/DA Crown DCi 2 | 2400N Crown DCi 4 | 2400N |
LF Driver | 2 x 2261FF, 254 mm (10 in) diameter, each with two 76 mm (3 in) diameter voice coils, Neodymium Differential Drive®, Direct Cooled™ |
HF Driver | 3 x 2415K, D2 Dual Diaphragm Dual Voice Coil Compression Drivers, each with two 38 mm (1.5 in) dia. Voice Coils; 21 mm (0.8 in) exit |
Enclosure Material | Fiberglass shell, gelcoat finish, with 18 mm Birch plywood internal bracing. |
Grille | Powder coated 14 gauge hex-perforated steel with zinc under-coating, backed with acoustically transparent cloth and hydrophobic screen. |
Inter-Enclosure Angles | VLA-C2100 to VLA-C2100: 2.4°, 3.8°, 6.0°, 9.5°, 15° using VLA-C2100 Bracket Plate (included with VLA-C2100)VLA-C2100 to VLA-C265 (either model on top/bottom): 1.9°, 3.0° using VLA-C2100 Bracket Plate (included with VLA-C2100) and 4.7°, 7.5°, 11.9° using VLA-C265 Bracket Plate (included with VLA-C265)VLA-C2100 below VLA-C125S Subwoofer (VLA-C2100 cannot be connected above C125S): 0°, 7.5° using VLA-C125S Bracket Plate (included with VLA-C125S) |
Environmental | IP-55 rating per IEC529 (dust protected and protected against jets of water) |
Terminals | CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9mm (0.375 in) spade lugs. Touch-proof covers |
Colors | -GR: Gray (similar to Pantone 428C), -BK: Black |
Dimensions (H x W x D) | 381 x 848 x 460 mm (15.0 x 33.4 x 18.1 in) |
Net Weight (each) | 37.7 kg (83 lbs) |
Shipping Weight (ea) | 44.0 kg (97 lbs) |
Included Accessories | 2 x VLA-C2100 Bracket Plates 8 pcs. M10 x 35 mm stainless steel bolts (1.5mm pitch, 6 mm hexdrive) for attaching Bracket Plates 2 pcs. Plastic Trim Cover Panels for Bracket Plates, each attaches via 4 pcs (8 total) 3-32 x ½” trusshead, phillips-drive, stainless steel bolts |
Optional Accessories | VLA-C-SB2 (JBL-VLACSB2BK) Suspension Bracket Kit |