VLA-C125S JBL
G2B 식별번호 : 23862792

Dual 15" Subwoofer with Differential Drive®

VLA-C125S는 듀얼 15“ 서브우퍼 스피커로서, 듀얼 드라이버를 통하여 강력한 저음 출력과 폭넓은 주파수 대역 재생이 가능한 컴팩트 서브우퍼 스피커입니다. 안전한 리깅방식이 적용되었으며, IP-55 등급의 방진/방습 규격에 준합니다.

고성능 경량 네오디뮴 디퍼렌셜 드라이버 우퍼탑재
저중량 및 고출력의 트랜스듀서 탑재
IP-55 등급 방진/방습 규격 적용
유리섬유 재질의 인클로저와 내후성이 강한 부품 구성
15인치 디퍼렌셜 드라이브

Frequency Range (-10 dB)52 Hz – 210 Hz
Frequency Response (±3 dB)62 Hz – 123 kHz
System Power Rating1600 W Continuous Pink Noise (6400 W peak), 2 hrs800 W Continuous Pink Noise (3200W peak), 100 hrs
Maximum Input Voltage80 V Rms (2 hrs), 160 V peak
Maximum SPL (1m)127 dB Cont. Ave (2 hrs), 133 dB Peak
Sensitivity98 dB (52 Hz – 210 Hz, 2.83V)
Impedance4Ω, 3.0Ω min @ 195 Hz
AmplifiersCrown DCi Family with DSP on-board
RecommendedCrown DCi 2 | 2400N Crown DCi 4 | 2400N
Low Frequency Driver2 x 2275H, 304 mm (15 in) diameter , each with two 76 mm (3 in) diameter voice coils, Neodymium Differential Drive®, Direct Cooled™
Enclosure MaterialFiberglass shell, gelcoat finish, with 18 mm Birch plywood internal bracing.
GrillePowder coated 14 gauge hex-perforated steel with zinc under-coating, backed with acoustically transparent cloth and hydrophobic screen.
Inter-Enclosure AnglesVLA-C125S to VLA-C125S: 0° using VLA-C125S Bracket Plate (included with VLA-C125S)VLA-C265 below VLA-C125S Subwoofer (VLA-C265 cannot be connected above C125S): 0°, 5° using VLA-C125S Bracket Plate (included with VLA-C125S)VLA-C2100 below VLA-C125S Subwoofer (VLA-C2100 cannot be connected above C125S): 0°, 7.5° using VLA-C125S Bracket Plate (included with VLA-C125S)
EnvironmentalIP-55 rating per IEC529 (dust protected and protected against jets of water).
TerminalsCE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9mm (0.375 in) spade lugs. Touch-proof covers. Full set of terminals on back panel, plus optional-use inter-cabinet connection terminals located on top and bottom panels of cabinet.
Colors-GR: Gray (similar to Pantone 428C), -BK: Black
Dimensions (H x W x D)508 x 848 x 634 mm (20.0 x 33.4 x 24.9 in)
Net Weight (ea)56.7 kg (125 lbs)
Shipping Weight (ea)62.6 kg (138 lbs)
Included Accessories2 x VLA-C125S Bracket Plates 8 pcs. M10 x 35 mm stainless steel bolts (1.5mm pitch, 6 mm hex-drive) for attaching Bracket Plates 2 pcs. Plastic Trim Cover Panels for Bracket Plates, each attaches via 4 pcs (8 total) 3-32 x ½” trusshead, phillips-drive, stainless steel bolts.
Optional AccessoriesVLA-C-SB Suspension Bar Kit -- For top & bottom of the array, includes 2 identical Suspension Bars (for top/bottom), 4 pcs ¾-inch Class 2 Screw Pin Shackles (must use 2 Shackles for each Suspension Bar, located at end channels, not in the center).VLA-C125S-ACC kit – For adding terminal cup to front to allow easy and neat cardioid subwoofer wiring. VLA-C-ACC kit – For adding front baffle terminals for cardioid subwoofer configuration.

<개인정보처리방침>