TechDataPS

PRODUCT

Control 16C-VA
JBL

Two-Way 6.5" Co-axial CeilingLoudspeaker for EN54-24 Applications /
EN 54-24 Compliant for Life Safety Applications

Control 16C-VA는 컴팩트 실링 스피커로서 카페, 공항, 리셉션 룸, 라운지, 컨벤션센터, 호텔, 교육공간 등에 사용하기에 적합합니다. 70V / 100V에서 넓은 대역폭과 커버리지를 제공하며 손쉬운 천정 설치가 가능합니다.

• 6.5인치 LF드라이버

• 50와트의 출력

• 120의 커버리지 범위 

Frequency Response (-10dB)62 Hz – 20 kHz
Frequency Response (±3 dB)96 Hz – 15 kHz
Power RatingIEC System Long-Term Ratings (low-Z direct):
100 Watts Continuous Program Power
50 Watts Continuous Pink Noise (200W peak), 100 hrs
Rated Noise Power30W (30W tap)
Rated Noise Voltage70V/100V (with 70V/100V tap settings)
Sensitivity91 dB (1kHz - 16 kHz)
EN54 Sensitivity (@ 4m)77 dB (per EN54-24 spectrum and measurement conditions at 4 meters).
Coverage Angle110° conical (1 kHz - 16 kHz)
Coverage Angles(by Frequency) Conical (Vertical & Horizontal)500 Hz: 180°1000 Hz: 160°2000 Hz: 155°4000 Hz: 92°
Reference AxisSpecification and measurement reference is directly on-axis vertically and horizontally, directly below the speaker as speaker it is installed in the horizontal ceiling plane
Directivity Factor (Q)7.8
Directivity Index (DI)8.2 dB
Maximum SPL (1m)108 dB (low-impedance, 116 dB peak)
106 dB (top 70V/100 tap)
EN54: 91 dB (4m, top 70/100V tap)
EN54 Max SPL (@ 4m)91 dB (per EN54-24 spectrum and measurement conditions, 30W tap, at 4 meters)
Impedance8 ohms (in direct/bypass 8 ohm setting); EN54 nominal impedance 7 ohms (based on min Z of 5.7 ohms at 11.2 kHz) 3.8W@70V; 7.5W@100V Tap: 1333Ω 7.5W@70V; 15W@100V Tap: 667Ω 15W@70V; 30W@100V Tap: 333Ω 30W@70V; N/C@100V Tap: 166Ω
Transformer Taps30W, 15W, 7.5W @ 70V or 100V (plus 3.8W @ 70V only)
Crossover Network12 dB/oct (2nd order) low-pass to LF driver, 12 dB/oct (2nd order) high-pass to HF driver
FuseThermal Fuse, open temperature 152 degrees C, Rating >= 10A @ 250VAC
DriversLF Driver: 165 mm (6.5 in)
HF Driver: 19 mm (3/4 in)
ConnectionsInput +, Input -, Earth (connected to backcan). Ceramic with brass inserts (3.2 mm/0.126 in opening), accommodates 2.5 sq mm / 12 AWG wire.
Gland Nut/Strain ReliefAccommodates round jacketed cables 4.0 mm (0.16 in) through 9.0 mm (0.36 in)
MaterialsABS baffle with UL94-V0 and UL94-5VB flame class fire rating; Zinc-plated steel backcan
Safety AgencyEN54-24:2008 certified Type A (Certificate No. 0359-CPR-00485); Compliant with BS5839/8; UL1480, UL2043, NFPA90 & NFPA70; Suitable for use in air handling spaces, Signaling Speaker; rated IP-21 per IEC529/60529; Transformer UL registered per UL1876; ROHS, C-tick N108, CE compliant; Baffle meets UL94-V0 and UL94-5VB flammability rating; In accordance with IEC60849/ EN60849 systems
Dimensions253 mm diameter x 262 mm from back of baffle to back of gland nut (10.0 in diameter x 10.3 in in depth)
Ceiling Cutout SizeCircular cutout with 223 mm (8.8 in) diameter (cardboard cutout template included)
Ceiling Thickness RangeUp to 38 mm (1.5 in) with stock dog-ears. MTC-TCD thickceiling dog-ears available for up to 60 mm (2.4 in) ceiling thicknesses
Safety Seismic AttachmentOne point, top surface
Net Weight3.4 kg (7.4 lbs, one speaker)
Shipping Weight11.2 kg (24.7 lbs, pair in master carton)
Included AccessoriesC-ring support backing plate, 2 tile support rails (for 2 ft or 600 mm tile spans; optional MTC-48TR extension available for larger 4 ft or 1200 mm tile spans), cutout template, paint shield, grille
Optional AccessoriesMTC-16WG high humidity grille MTC-26NC new construction bracket MTC-26MR mud-ring construction bracket MTC-TCD thick-ceiling dog-ears for ceiling thicknesses up to 60 mm (2.4 in, ordering one set = 24 dogears for 6 speakers) MTC-48TR tile rail for 1200 mm (4 ft) tile spans
Input ConnectorsCeramic block with brass inserts
ColorWhite
Backcanformed steel (included "blind-mount")
Plenum UsageYes, backcan included

RECOMMENDED PRODUCTS

<개인정보처리방침>