CBT 50LA-1
JBL

Line Array Column Loudspeaker

CBT 50LA-1는 매우 넓은 수평 커버리지를 자랑하는 컬럼형 라인어레이 스피커로써, 특허 출원된 BeamWidth Technology™이 적용되어 있는 스피커입니다. 슬림형 디자인이 필요한 공간에 최적화된 스피커이며, 보이스에 대한 명료도를 한층 증대하였습니다.

• Constant Beamwidth 기술이 고음역대까지 지속적인 지향성으로 커버리지를 벗어날 경우의 로빙현상 감쇄
• 내장형 70V/100V 트랜스포머, 8옴 직접 연결

• 인테리어와 최적의 조화 • 내장형 트랜스포머 탑재

• LOW/HIGH 임피던스 선택 가능

• 2“ 드라이버 8개 구성

 

ComponentsEight 50 mm(2 in) Full-Range
Frequency Range (-10 dB)80 Hz – 20 kHz
Coverage PatternVertical 20° (1.5 kHz - 16 kHz, ±10°)Horizontal 150° (ave, 1 kHz – 4 kHz, ±20°)
Sensitivity (2.83V@ 1m)93 dB (speech mode, 2 kHz - 14 kHz)89 dB (music mode, 300 Hz - 18 kHz)
Nominal Impedance8 ohms
Power Capacity (8 ohm setting)150W (600W peak), 2 hrs100 W (400W peak), 100 hrs
Max SPLSpeech mode: 115 dB cont ave (121 peak)Music mode: 111 dB cont ave (117 peak)
70V/100V Transformer Taps60W, 30W, 15W, (7.5W at 70V only), and 8Ω thru, via switch
EnclosureFiberglass reinforced ABS cabinet, painted aluminum grille
Outdoor CapabilityIP-55 rated, per IEC529, when installed with optional MTC-PC2 panel cover. UV, moisture and 200-hr ASTM G85 acid-air/salt-spray resistant.
ColorsBlack or White (-WH)
Insert PointsTen M6 insert points on back panel.
MountingIncluded swivel (pan) / tilt wall bracket provides continuously variable +/-80 degree left-right swivel aiming (at no up/down tilt -- see Bracket Guide for maximum swivel range at various up/down tilt angles), continuously adjustable ±15 degree tilt, as well as 5 degree fixed increment points within the range. Ten threaded mounting points located on back panel conform to industry standard rectangular 108 x 51 mm (4.25 x 2.0 in) pattern for OmniMount® 30.0 and other compatible third-party brackets. Threaded mounting points can be utilized for suspension.
Dimensions (H x W x D)528 x 99 x 153 mm(20.8 x 3.9 x 6.0 in)
Net Weight4.1 kg (9.0 lb)
Included AccessoriesSwivel (pan) / tilt wall bracket
Optional AccessoriesMTC-PC2 terminal panel coverMTC-CBT-FM1 flush-mount low-profile wall-mount bracket MTC-CBT-SMB1 Stand-Mount Bracket for use with 35 mm speaker stand

<개인정보처리방침>